B&B Electronics DSC-100IND Manuel d'utilisateur Page 12
- Page / 38
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
4.2 Enabling the Special Registers
The DSC-100 contains two unique registers, an Interrupt Status Register and an Options
Register. These registers are enabled when the SPAD jumper is removed (factory default). They
replace the UART Scratchpad Register on accesses to register address 7.
The Interrupt Status Register and Options Register are accessed through the scratchpad
location of either UART. The DLAB bit of the UART (Line Control Register, bit 7) is used to
select between the two registers. The most recent write of a DLAB bit in either UART selects
between the two registers as shown in Figure 7.
Scratchpad RegistersappliedX
Options Registerremoved1
Interrupt Status Registerremoved0
Register selected for
address 7 accesses
SPAD JumperDLAB Bit
Figure 7 --- DLAB bit selects between special registers
4.3 Interrupt Status Register
The read-only Interrupt Status Register can be used to quickly identify which serial ports
require servicing after an interrupt. Reading the Interrupt Status Register will return the interrupt
status of the entire DSC-100, as shown in Figure 8. The individual bits are cleared as the
interrupting ports are serviced. The interrupt service routine should ensure that the interrupt
status register reads zero before exiting.
Port 1 --- 1 if interrupt pending0
Port 2 --- 1 if interrupt pending1
0 (not used)2
0 (not used)3
0 (not used)4
0 (not used)5
0 (not used)6
0 (not used)7 (MSB)
DescriptionBit
Figure 8 --- Interrupt Status Register
Quatech DSC-100 User's Manual 10
- Declaration of Conformity 4
- 1 General Information 6
- 1.1 Features 7
- 2 Hardware Configuration 8
- 3 Hardware Installation 10
- 4.3 Interrupt Status Register 12
- 4.4 Options Register 13
- 4.4.2 Clock Rate Multiplier 14
- 5 Windows Configuration 15
- 5.2 Windows 2000 16
- 5.3 Windows 98 17
- 5.4 Windows 1995 19
- 27
- 6 Other Operating Systems 28
- 6.3.1 QTPCI.EXE 29
- 7 External Connections 32
- D-25 connector 33
- (using adapter cable) 33
- D-9 connector 33
- (CN2 and CN3) 33
- 8 PCI Resource Map 34
- 9 Specifications 35
- 10 Troubleshooting 37
- User's Manual 38
- Revision 1.13 38
- November 2006 38
- 940-0138-113 38
Coby CSMP175 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Głośniki dokujące Coby CSMP175.
Dostarczamy 1 pdf podręczników Coby CSMP175 do pobrania za darmo według typów dokumentów: Instrukcja Obsługi
Commentaires sur ces manuels