B&B Electronics 3PCIOU1 Spécifications télécharger pdf (Page 7)

General Information

Document Number 3PCI-4310m Chapter 1 1

Introduction

MIport PCI serial interface cards allow you to add RS-232, RS-422 and RS-485

interfaces to Windows based computers equipped with a PCI bus. Depending on your

choice of card one, two or four optically isolated serial ports, or two, four or eight non-

isolated serial ports, can be added. MIport PCI serial cards are Plug and Play

compatible, which allows the Windows Operating System and driver to set the

addresses and IRQ used by the card.

Figure 1. A 3PCIOU2 Optically Isolated Two-Port PCI Serial Interface

Card

Features

• Optically isolated or non-isolated models available

• Isolated models available in 1, 2 or 4 ports

• Non-isolated models available in 2, 4 or 8 ports

• 4 and 8 port models include fanout cables

• Plug & Play compatible – Windows sets addresses and IRQ used

• 5 volt and 3.3 volt PCI bus compatible

• PCI-X compatible

• Conform to the PCI V2.3 Universal PCI specification

• RS-232/RS-422/RS-485 interfaces

• 2-wire or 4-wire RS-485 operation (half or full-duplex)

• Automatic Send Data Control for RS-485 operation

• Buffered high speed XR17D15x PCI Bus UARTs (16C550 compatible) with 64 byte

FIFOs for input/output with programmable trigger thresholds

• Advanced driver function for COM port rename (Refer to Chapter 4)

• Supports baud rates up to 460.8 kbps

• Windows XP, Windows 2008 Server (32/64 bit), Windows Vista (32/64 bit),

Windows 7 (32/64 bit), Linux Kernel 2.6.x is also supported in the following

distributions: Ubuntu 10.04 Desktop Edition (32/64 bit), Ubuntu 10.04 Server

Edition (32/64 bit)

1 2 3 4 5 6 7 8 9 10 11 12 ... 56 57

Pas de commentaire

B&B Electronics 3PCIOU1 Spécifications Page 7